STEYR 8110A SK2 Turbo Electronic V 1.0 FS 17
Hello, this time is another small unplanned but fast intermediate / motivation project for the Plus 760ger model.
One thing in advance, there will not be as many versions / models as in LS13 / 15 times, but only the more important models, for private reasons, we simply have not so much time or nerves exertion.
The 8110a Turbo SK2 can be used as a tractor for medium-sized businesses. He also makes a good figure as a FL tractor.
This model is intended to shorten the waiting time on the 8130a Turbo SK2. One ahead, the 8130a SK2 will not be so modern.
ATTENTION: This entry is extended / updated.
INFO:
Construction period: 1984- 1994
Engine: Steyr WD 411.44 (58 hp to BJ 1984 from 1984 -> 64 PS)
Gear type: Synchronized Steyr Gruppenschaltgetreibe with 16v and 8r gears
Fuel capacity: 60l
BJ: 1987
Net weight: 3000 kg
nameplate attached
sound is Of several Steyr 8110a Turbo SK2 videos / self-recorded recordings.
The snow chains no longer fit the tire profile as well. The times would have to be reworked. The twin wheels have no tire tracks and originate as well as the snow chains from LS13? / LS15 from CebuljCek Modding. The twin tires + snow chains we have times as “emergency solution” so installed, since we work on several projects at the same time.
We ask for your understanding.
Features: from outside:
front fender to / Remove button R
doors to / Remove button R
to open left door / close button R
Tyres (front / rear) to / Remove button R
Twin tires (rear only) to / Remove button R
Shop configurations:
Coupling Products:
Standart: (only atacher joint; intended for purchasable Frontgewichte or dishwashing tubs)
hitch front: (installed atacher joint; the rank of followers)
Fronthydraulik + Frontzapfwelle
Front loader attached:
yes or no
Engine version:
Standard Motor: WD 611.43 (100 PS)
Optional: greater injection pump (+10 hp)
Wheel Setup:
standard tires: front 380/85 / R24 rear 540/65 / R38
wide tires: front 540/65 / R24 rear: 600/65 / R38
Pflegebereifung: front 230/95 / R34 rear: 230/95 / R44
Design:
RUL (Rundumleuchte): intended for “normal” / red-white version
Other features:
IC circuit:
front, rear, side windows, roof hatch and doors (including door closing sound) to open / close
FH lower link, passenger footrest and a sun visor / foldable
wiper
cabin light
Animated / Illuminated:
tachometer, fuel and temperature indicator
lights / hazard lights displays (including turn signal sound (from a Steyr 8130A SK2))
Indicators / hazard lights display works jz as genuine:
tractor alone = 1 Läpchen flashes
Tractor + 1 trailer = 2 lamps flash
tractor + 2 followers = 3 lights flash
indicator light
charging indicator light integrated (battery lights jz at engine start)
“provisionally” animated pedals; Accelerator pedal, brake pedal + clutch: IMPORTANT! Drive control with active reversing circuit (green arrow must be visible -> direction change) otherwise the pedal animation does not fit. (Select Tractor)
at selected tractor without attached trailer / equipment: animated Heckhydraulik + lever (right in the tractor) KEY V,
animated lever for the PTO clutch (left in the tractor) BUTTON B, the is a small gimmick so something is moving in the cabin , This is pure optics, so that the levers with attached devices move along requires a suitable script, we guess. 🙂 When trailers are attached, you can lift the HH (rear hydraulic) (tractor must be selected) and the lever moves.
The lever for the ZWK (Zapfwellekupplung) can be switched on / off at any time (tractor must be selected), it has no function, it is purely optical.
Other:
Washable
Indoor Sound (reacts to open disks or doors)
work light front button NUM 5
working light behind key NUM 6
swing axle
passenger script installed
low beam + high beam slightly yellowish as well as in real life
Required / Recommended Mods:
Front-Equipment-Pack:
http://www.fsmods17.com/steyr-front-equipment-pack-v1-fs-17/
Drive Control:
http://www.fsmods17.com/drive-control-v4-10-fs17/
A big thanks goes to Max (MB 3D modeling) because he always lets us change his Steyr 8080a SK1 model and gives us the release release (= his original DL link). (This was introduced to LS13 times by us (STEYR Modding) so with it (MB3D modeling) arranged.) Thanks to all users who regularly in Facebook: STEYR Modding team participate in our surveys.
